Specifications

7-3
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Chapter 7 Configuring Other Settings
Server Setup
Settings on the Time Server Setup Page
The Time Server Setup page contains the following settings:
• Simple Network Time Protocol
• Default Time Server
• GMT Offset (hr)
• Use Daylight Savings Time
• Manually Set Date and Time
The page also shows the active time server.
Simple Network Time Protocol
Select Enabled or Disabled to turn Simple Network Time Protocol (SNTP) on or off. If your network
uses SNTP, select Enabled.
Default Time Server
If your network has a default time server, enter the server’s IP address in the Default Time Server entry
field.
The Current Time Server line under the entry field reports the time server the access point is currently
using.
Note The DHCP or BOOTP server can override the default time server.
GMT Offset (hr)
The GMT Offset drop-down menu lists the world’s time zones relative to Greenwich Mean Time (GMT).
Select the time zone in which the access point operates.
Use Daylight Savings Time
Select yes or no to have the access point automatically adjust to Daylight Savings Time.
Manually Set Date and Time
Enter the current date and time in the entry fields to override the time server or to set the date and time
if no server is available.
When entering the date and time, use forward-slashes to separate the year, month, and day, and use
colons to separate the hours, minutes, and seconds. For example, you would enter 2001/02/17 for
February 17, 2001, and 18:25:00 for 6:25 pm.