Specifications

Chapter 6 Configuring Proxy Mobile IP
The Proxy Mobile IP Setup Page
6-12
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Settings on the Authenticator Configuration Page
802.1X Protocol Version (for EAP Authentication)
This drop-down menu allows you to select the draft of the 802.1X protocol the
access point’s radio will use. EAP operates only when the radio firmware on client
devices complies with the same 802.1X Protocol draft as the management
firmware on the access point. See the “Setting Up EAP Authentication” section
on page 8-20 for additional information.
Primary Server Reattempt Period (Min)
This field specifies how many minutes should pass before checking for the
primary server when it was not initially accessible.
Server Name/IP
This field identifies the name or IP address of the RADIUS or TACACS server
proxy Mobile IP is using for authentication purposes.
Server Type
This drop-down menu displays the selections you can make to designate the server
type you want the proxy Mobile IP configuration to use. The choices are RADIUS
or TACACS. RADIUS is the default setting.
Port
This field specifies the port number the server uses for authentication. The default
setting, 1812, is the port setting for Cisco’s RADIUS server, the Cisco Secure
Access Control Server, and for many other RADIUS servers. Check your server’s
product documentation to find the correct port setting.
Shared Secret
This field identifies the shared secret used by your RADIUS server. The shared
secret on the access point must match the shared secret on the RADIUS server.
The shared secret can contain up to 64 alphanumeric characters. This setting has
no default.