Specifications

Chapter 6 Configuring Proxy Mobile IP
The Proxy Mobile IP Setup Page
6-10
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
General
Selecting the General link takes you to the Proxy Mobile IP General page
(Figure 6-3), where you enable proxy Mobile IP on the access point and identify
the IP addresses of the authoritative access points on your wireless network.
Figure 6-3 Proxy Mobile IP General Page
Settings on the Proxy Mobile IP General Page
Enable Proxy Mobile IP
This setting enables the proxy Mobile IP feature on the access point. The default
setting is no.
Note Proxy Mobile IP must also be enabled for the SSID you intend to use to support
the feature. Otherwise, proxy Mobile IP will not work. See the “Configuring the
Authoritative Access Point” section on page 6-21 for additional information.
Authoritative AP n
These settings identify the IP addresses of up to three authoritative access points
(AAPs) on the wireless network. At least one AAP is required for the proxy
Mobile IP enabled wireless network. The n represents the number of the
authoritative access point. The authoritative access point is the device that
registers with the home agent. After registering with the home agent, the AAP