Specifications

5-16
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Chapter 5 Configuring Filters and Quality of Service
Applying QoS
Figure 5-15 shows how the Spectralink filter is applied.
Figure 5-15 Applying the Spectralink Filter
By CoS Value
Traffic that comes to the access point or bridge over an Ethernet trunk is already classified by its Class
of Service (CoS) settings. The classification is applied unless changed by one of the methods described
above.
By DSCP Value
The differentiated services code point (DSCP) values in the IP packets can be used to classify the traffic
based on the DSCP-to-CoS mappings shown in Figure 5-16.
Figure 5-16 DSCP-to-CoS Conversion