Specifications

5-14
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Chapter 5 Configuring Filters and Quality of Service
Applying QoS
Step 4 Click the yes radio button in the Use Symbol Extensions setting.
By VLAN
The default priority of a VLAN can be set, and the access point or bridge uses this setting for all traffic
on that VLAN except when overridden by a filter setting. This filter setting is applied through the policy
group on the VLAN.
Follow these steps to set up a VLANs QoS default priority.
Step 1 From the Setup page, click VLAN in the Associations section. The VLAN Setup page appears.
Step 2 Choose the VLAN to which you want to apply the priorities by highlighting it in the Existing VLANs
field, and click Edit. The VLAN ID page for that VLAN appears (Figure 5-12).
Figure 5-12 VLAN ID page
Step 3
To view the selections in the Default Priority field, click the drop-down menu.
Step 4 Select the default priority you wish the VLAN to use.
Step 5 Click OK to save your settings and return to the VLAN Setup page.