Specifications

5-4
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Chapter 5 Configuring Filters and Quality of Service
Filter Setup
Figure 5-4 Filter Set Page
Step 6
Select forward or block from the Default Disposition drop-down menu. This setting is the default action
for the protocols you include in the filter set. You can override this setting for specific protocols.
Step 7 In the Default Time to Live fields, enter the number of milliseconds unicast and multicast packets should
stay in the access point’s buffer before they are discarded. These settings will be the default time-to-live
values for the protocols you include in the filter set, but you can override the settings for specific
protocols. If you leave these settings at 0, the time-to-live settings default to 3 seconds for multicast
packets and 5 seconds for unicast packets.
Step 8 Type the name or the ISO numeric designator for the protocol you want to add in the Special Cases entry
field and click Add New. For example, to add Telnet to an IP port filter set, type telnet or 23.
The Protocol Filter Set page appears. Figure 5-5 shows the Protocol Filter Set page.
Figure 5-5 Protocol Filter Set Page