Specifications

4-15
Cisco Aironet Access Point Software Configuration Guide
OL-0657-07
Chapter 4 Configuring VLANs
A Wireless VLAN Deployment Example
Step 8 Make the following entries on this page:
a. VLAN Name: Maintenance
b. VLAN Enable: Enabled
c. Default Priority: default
d. Default policy group: [0] None
e. Enhanced MIC verification for WEP: None
f. Temporal Key Integrity Protocol: None
g. WEP Key Rotation Interval: 0
h. Alert?: no
i. WEP Key 1: Set a 128-bit key.
Step 9 Click OK to return to the VLAN Setup page.
Step 10 Verify that your VLANs are listed in the Existing VLANs field.
Creating and Configuring the SSIDs
After you create the VLANs for your access point, you create the SSIDs to which the VLANs associate.
Follow these steps to create the SSIDs.
Step 1 Click Setup to return to the Setup page.
Step 2 Click Service Sets. The AP Radio Service Sets page appears (Figure 4-8).
Figure 4-8 AP Radio Service Sets Page