Specifications

vii
Channels and Maximum Power Settings for Cisco Aironet Lightweight Access Points
OL-11321-08
Preface
Audience
This guide is for the networking professional who installs and manages Cisco Aironet access points and
bridges.
To use this guide with lightweight access points, you should have experience working with a Cisco
Wireless LAN Controller and be familiar with the concepts and terminology of wireless local area
networks.
Purpose
This guide provides the channel and maximum power settings you need to install your lightweight access
points and bridges in supported regulatory regions.
For hardware information about Cisco Aironet access points and bridges, refer to the product hardware
installation guides for your access points and bridges available from the Cisco.com at this URL:
http://www.cisco.com/en/US/products/hw/wireless/
The access point products are listed under the “Access Points” and “Outdoor Wireless” sections. Choose
the needed product, then click Install and Upgrade in the Support box.
For information about Cisco Wireless LAN Controllers, refer to the Cisco documentation sets available
under the “Wireless LAN Controllers” section. Choose the needed controller, then click on the
documentation type in the Support box.