Specifications

2-87
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
debug wlccp wds
debug wlccp wds
Use the debug wlccp wds privileged EXEC command to activate display of wireless domain services
(WDS) debug messages.
debug wlccp wds
aggregator [packet]
authenticator {all | dispatcher | mac-authen | process | rxdata | state-machine | txdata}
nm [packet | loopback]
state
statistics
Note This command is not supported on bridges.
Syntax Description
Defaults Debugging is not enabled.
Command Modes Privileged EXEC
Command Description
aggregator [packet] (Optional) Activates display of debug messages related to radio
management. Use the packet option to display packets from and to the radio
management aggregator.
authenticator {all |
dispatcher
|
mac-authen
| process |
rxdata |
state-machine
|
txdata}
(Optional) Use this command and its options to turn on display of WDS
debug messages related to authentication.
• all—Enables all authenticator debugging
• dispatcher—Enables debugging related to handling authentication
requests
• mac-authen—Enables debugging related to MAC address
authentication
• process—Enables debugging related to authenticator processes
• rxdata—Enables display of EAPOL packets from clients
• state-machine—Enables authenticator state-machine debugging
• txdata—Enables display of EAPOL packets to clients
nm [packet | loopback] (Optional) Activates display of debug messages from the wireless network
manager (WNM). The packet option displays Cisco IOS packets from and
to the network manager, and the loopback option re-routes packets sent to
the WNM to the WDS access point console instead.
state (Optional) Activates display of state transitions for access points interacting
with the WDS access point.
statistics (Optional) Activates display of WDS statistics.