Specifications

2-83
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
debug wlccp ap
debug wlccp ap
Use the debug wlccp ap privileged EXEC command to enable debugging for devices that interact with
the access point that provides wireless domain services (WDS).
debug wlccp ap {mn | rm [statistics | context | packet] | state | wds-discovery}
Note This command is not supported on bridges.
Syntax Description
Defaults Debugging is not enabled.
Command Modes Privileged EXEC
Command History
Examples This example shows how to begin debugging for LEAP-enabled client devices participating in Cisco
Centralized Key Management (CCKM):
AP# debug wlccp ap mn
Related Commands
Command Description
mn (Optional) Activates display of debug messages related to client devices
rm [statistics | context |
packet]
(Optional) Activates display of debug messages related to radio
management
• statistics—shows statistics related to radio management
• context—shows the radio management contexts
• packet—shows output related to packet flow
state (Optional) Activates display of debug messages related to access point
authentication to the WDS access point
wds-discovery (Optional) Activates display of debug messages related to the WDS
discovery process
Release Modification
12.2(11)JA This command was first introduced.
Command Description
show debugging Displays all debug settings and the debug packet headers
show wlccp Displays WLCCP information