Specifications

2-82
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
debug radius local-server
debug radius local-server
Use the debug radius local-server privileged EXEC mode command to control the display of debug
messages for the local authenticator.
debug radius local-server {client | eapfast | error | packets }
Syntax Description
Defaults Debugging is not enabled.
Command Modes Privileged EXEC
Command History
Examples This example shows how to begin debugging for local authenticator errors:
AP# debug radius local-server error
Related Commands
Command Description
client Activates display of error messages related to failed client authentications
to the local authenticator
eapfast {encryption |
events | pac | pkts}
Activates display of messages related to EAP-FAST on the local
authenticator.
• encryption—displays encryption and decryption of packets sent and
received
• events—displays EAP-FAST events on the local authenticator
• pac—displays PAC generations and verifications
• pkts—displays packets received and transmitted from EAP-FAST
clients
error Activates display of error messages related to the local authenticator
packets Activates display of the content of RADIUS packets sent from and received
by the local authenticator
Release Modification
12.2(11)JA This command was first introduced.
Command Description
radius-server local Enables the access point as a local authenticator
show debugging Displays all debug settings and the debug packet headers