Specifications

2-79
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
debug dot11 ids mfp
debug dot11 ids mfp
Use the debug dot11 ids mfp privileged EXEC command to debug Management Frame Protection
(MFP) operations on the access point.
[no] debug dot11 ids mfp
ap {all |detector | events |generator | io}
wds {all | detectors | events | generators | statistics}|
wlccp
Syntax Description
Defaults There are no defaults for this command.
Command Modes Privileged EXEC
Command History
Examples This example shows how to debug the MFP detectors on the access point:
ap(config)# debug dot11 ids mfp ap detectors
Related Commands
ap Debugs MFP events on the access point.
all Debugs all MFP events.
detectors Debugs MFP detector key management events.
events Debugs high level MFP events.
generators Debugs MFP generator key management events.
io Debugs MFP IO (generate or detect frame) events.
reporting Debugs MFP reporting events.
statistics Debugs MFP WDS statistics received from the detectors.
wds Debugs MFP WDS events.
wlccp Debugs MFP WLCCP messages.
Release Modification
12.3(8)JA This command was introduced.
Command Description
dot11 ids mfp Configures MFP parameters on the access point.
show dot11 ids mfp Displays MFP parameters on the access point.