Specifications

2-78
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
debug dot11 ids
debug dot11 ids
Use the debug dot11 ids eap privileged EXEC command to enable debugging for wireless IDS
monitoring. Use the no form of the command to disable IDS debugging.
[no] debug dot11 ids {eap | cipher-errors}
Note This command is not supported on 1400 series bridges.
Syntax Description
Defaults Debugging is not enabled.
Command Modes Privileged EXEC
Command History
Examples This example shows how to activate wireless IDS debugging for authentication events:
AP# debug dot11 ids eap
Related Commands
eap Activates debugging of IDS authentication events
cipher-errors Activates debugging of cipher errors detected by IDS
Release Modification
12.3(4)JA This command was introduced.
Command Description
dot11 ids eap attempts Configures limits on authentication attempts and EAPOL
flooding on scanner access points in monitor mode
show debugging Displays all debug settings and the debug packet headers
show dot11 ids eap Displays wireless IDS statistics