Specifications

2-74
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
debug dot11 cac
Command History
Examples This example shows how to begin debugging of dot11 AAA accounting packets:
AP# debug dot11 aaa accounting
Related Commands
debug dot11 cac
Use the debug dot11 cac privileged EXEC command to begin debugging of admission control radio
functions. Use the no form of this command to stop the debug operation.
[no] debug dot11 cac
{events | unit}
Note This command is not supported on repeaters.
Syntax Description
Defaults Debugging is not enabled.
Command Modes Privileged EXEC
Command History
Release Modification
12.2(4)JA This command was introduced.
12.2(15)JA This command was modified to include the accounting, authenticator,
dispatcher, and manager debugging options.
Command Description
show debugging Displays all debug settings
show interfaces dot11radio aaa Optionally displays all radio clients
events Activates debugging of radio admission control events.
unit Activates verbose debugging of radio admission control events.
Release Modification
12.3(8)JA This command was introduced.