Specifications

2-66
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
countermeasure tkip hold-time
countermeasure tkip hold-time
Use the countermeasure tkip hold-time configuration interface command to configure a TKIP MIC
failure holdtime. If the access point detects two MIC failures within 60 seconds, it blocks all the TKIP
clients on that interface for the holdtime period.
countermeasure tkip hold-time seconds
Syntax Description
Defaults TKIP holdtime is enabled by default, and the default holdtime is 60 seconds.
Command Modes Configuration interface
Command History
Examples This example shows how to configure the TKIP holdtime on the access point radio:
ap(config-if)# countermeasure tkip hold-time 120
seconds Specifies the length of the TKIP holdtime in seconds (if the holdtime
is 0, TKIP MIC failure hold is disabled)
Release Modification
12.2(11)JA This command was introduced.