Specifications

2-65
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
concatenation
concatenation
Use the concatenation configuration interface command to enable packet concatenation on the bridge
radio. Using concatenation, the bridge combines multiple packets into one packet to reduce packet
overhead and overall latency, and to increase transmission efficiency.
concatenation [ bytes ]
Note This command is supported only on bridges.
Syntax Description
Defaults Concatenation is enabled by default, and the default maximum concatenated packet size is 3500.
Command Modes Configuration interface
Command History
Examples This example shows how to configure concatenation on the bridge radio:
bridge(config-if)# concatenation 4000
bytes (Optional) Specifies a maximum size for concatenated packets in bytes.
Enter a value from 1600 to 4000.
Release Modification
12.2(11)JA This command was introduced.