Specifications

2-63
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
clear wlccp wds
clear wlccp wds
Use the clear wlccp wds privileged EXEC command to clear WDS statistics and to remove devices from
the WDS database.
clear wlccp wds {[ap [mac-address]] | [mn [mac-address]] | statistics |
aaa authentication mac-authen filter-cache [mac-address]}
Syntax Description
Defaults This command has no default setting.
Command Modes Privileged EXEC
Command History
Examples This example shows how to remove an access point from the WDS database:
AP# clear wlccp wds ap 1572.342d.97f4
Related Commands
ap [mac-address] Removes access points from the WDS database. If you specify a MAC
address (in the hhhh.hhhh.hhhh format), the command removes the specified
device from the WDS database. If you do not specify a MAC address, the
command removes all access points from the WDS database.
mn [mac-address] Removes client devices (mobile nodes) from the WDS database. If you
specify a MAC address (in the hhhh.hhhh.hhhh format), the command
removes that device from the WDS database. If you do not specify a MAC
address, the command removes all clients from the WDS database.
statistics Resets all WDS statistics.
aaa authentication
mac-authen
filter-cache
[mac-address]
Removes MAC addresses from the access point’s MAC authentication filter
cache. If you specify a MAC address (in the hhhh.hhhh.hhhh format), the
command removes that device from the filter cache. If you do not specify a
MAC address, the command removes all addresses from the cache.
Release Modification
12.2(15)JA This command was introduced.
Command Description
show wlccp Displays information on devices participating in Cisco
Centralized Key Management (CCKM)
wlccp wds aaa authentication
mac-authen filter-cache
Enables MAC authentication caching on the access point