Specifications

2-54
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
clear dot11 client
clear dot11 client
Use the clear dot11 client privileged EXEC command to deauthenticate a radio client with a specified
MAC address. The client must be directly associated with the access point, not a repeater.
clear dot11 client {mac-address}
Syntax Description
Defaults This command has no defaults.
Command Modes Privileged EXEC
Command History
Examples This example shows how to deauthenticate a specific radio client:
AP# clear dot11 client 0040.9645.2196
You can verify that the client was deauthenticated by entering the following privileged EXEC command:
AP# show dot11 associations 0040.9645.2196
Related Commands
mac-address Specifies a radio client MAC address (in xxxx.xxxx.xxxx format)
Release Modification
12.2(4)JA This command was introduced.
Command Description
show dot11 associations Displays the radio association table or optionally displays association
statistics or association information about repeaters or clients