Specifications

2-30
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
bridge forward-time
bridge forward-time
Use the bridge forward-time global configuration command to configure the forward delay interval on
the bridge.
bridge group aging-time seconds
Note This command is supported only on bridges.
Syntax Description
Defaults The default forward time is 30 seconds.
Command Modes Global configuration
Command History
Examples This example shows how to configure the forward time for bridge group 2:
bridge(config)# bridge 2 forward-time 60
Related Commands
group Specifies the bridge group
seconds Specifies the forward time in seconds
Release Modification
12.2(11)JA This command was introduced.
Command Description
bridge protocol ieee Enables STP on the bridge
bridge aging-time Specifies the length of time that a dynamic entry can remain
in the bridge table from the time the entry is created or last
updated
bridge hello-time Specifies the interval between the hello BPDUs
bridge max-age Specifies the interval that the bridge waits to hear BPDUs
from the spanning tree root
bridge priority Specifies the bridge STP priority