Specifications

A-2

Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges

0L-24115-01

Appendix A List of Supported Cisco IOS Commands

admission-control (QOS Class interface configuration mode)

Note This command is not supported on repeaters.

admit-traffic (SSID configuration mode)

Note This command is not supported on repeaters.

admit-traffic (QOS Class interface configuration mode)

Note This command is not supported on repeaters.

anonymous-id (dot1x credentials configuration mode)

antenna

ampdu

archive download-sw

archive upload

arp

authentication (local server configuration mode)

authentication client

authentication key-management

authentication network-eap (SSID configuration mode)

authentication open (SSID configuration mode)

authentication shared (SSID configuration mode)

beacon

beacon privacy guest-mode

boot buffersize

boot ios-break

boot mode-button

boot upgrade

bridge

Note The bridge 1 protocol ieee command is not supported on access points and bridges. You cannot disable

this command unless you reboot the unit.

bridge aging-time

bridge forward-time