Specifications

2-19
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
authentication network-eap (SSID configuration mode)
• To enable both WPA and CCKM, you must set the encryption mode to a cipher suite that includes
TKIP.
Examples This example shows how to enable both WPA and CCKM for an SSID:
AP(config-if-ssid)# authentication key-management wpa cckm
Related Commands
authentication network-eap (SSID configuration mode)
Use the authentication network-eap SSID configuration mode command to configure the radio
interface (for the specified SSID) to support network-EAP authentication with optional MAC address
authentication. Use the no form of the command to disable network-eap authentication for the SSID.
[no] authentication
network-eap list-name
[mac-address list-name]
Note The mac-address option is not supported on bridges.
Syntax Description
Defaults This command has no defaults.
Command Modes SSID configuration interface
Command History
Command Description
encryption mode ciphers Specifies a cipher suite
ssid Specifies the SSID and enters SSID configuration mode
wpa-psk Specifies a pre-shared key for an SSID
list-name Specifies the list name for EAP authentication
mac-address list-name Specifies the list name for MAC authentication
Release Modification
12.2(4)JA This command was introduced.