Specifications

2-292
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
write memory
write memory
Use the write memory command to copy the running configuration into flash memory (NVRAM).
write memory
Syntax Description This command has no arguments or keywords.
Defaults This command has no defaults.
Command Modes Privileged EXEC command.
Command History
Usage Guidelines If an error message similar to the following displays, then there is no available space for the
configuration file in the flash memory:
Error writing new config file “flash:/config.txt.new”, nv_done:unable to open
“flash:/config.txt.new.” Error writing new block-fs “file flash:/private-multiple-fs.new”
Examples This example shows the command entry and the resulting command response:
AP1242aG#write memory
Building configuration...
[OK]
Related Commands
Release Modification
12.2(4)T This command was introduced.
Command Description
copy system:/running-config url Writes the running configuration onto a server on the
network. Previously, the write network command.
Note See the Cisco IOS mainline documentation for more
details on this command.
write terminal Writes (displays) the running configuration to a terminal
screen.