Specifications

2-289

Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges

0L-24115-01

Chapter 2 Cisco IOS Commands for Access Points and Bridges

workgroup-bridge unified-vlan-client

Use the workgroup-bridge unified-vlan-client global configuration command to enable the Workgroup

Bridge (WGB) VLAN tagging feature.

[no] workgroup-bridge unified-vlan-client [broadcast-replicate]

Note This command is supported only on APs that support a station role of “WGB.”

Syntax Description

Defaults The default is disabled.

Command Modes Global configuration

Command History

Usage Guidelines This command is used for the unified solution.

Examples This example shows how to enable WGB broadcast to all VLANs:

wgb(config-if)# workgroup-bridge unified-vlan-client broadcast-replicate

Related Commands

no Enables/disables the The Workgroup-Bridge (WGB) VLAN tagging

feature.

broadcast-replicate Enables WGB broadcast to all VLANs.

Release Modification

12.4(25d)JA This command was introduced.

Command Description

show running-config Displays the current operating configuration