Specifications

2-288

Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges

0L-24115-01

Chapter 2 Cisco IOS Commands for Access Points and Bridges

workgroup-bridge timeouts iapp-refresh

Use the workgroup-bridge timeouts iapp-refresh global configuration command to fine tune the IAPP

refresh timeout. This CLI command is applicable to an AP working in WGB mode only.

workgroup-bridge timeouts iapp-refresh ms

Note This command is supported only on APs that support a station role of “WGB.”

Syntax Description

Defaults The default iapp refresh timeout is 1000 ms.

Command Modes Global configuration

Command History

Examples This example shows how to assign an IAPP refresh timeout to a workgroup bridge:

wgb(config-if)# workgroup-bridge timeouts iapp-refresh 100

ms Enter a number from 100 to 1000.

Release Modification

12.4(25d)JA This command was introduced.