Specifications

2-286

Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges

0L-24115-01

Chapter 2 Cisco IOS Commands for Access Points and Bridges

workgroup-bridge timeouts client-add

Use the workgroup-bridge timeouts client-add global configuration command to fine tune the client

add timeout for WGB. This CLI command is applicable to an AP working in WGB mode.

workgroup-bridge timeouts client-add ms

Note This command is supported only on APs that support a station role of “WGB.”

Syntax Description

Defaults The default client add timeout is 5000 ms.

Command Modes Global configuration

Command History

Examples This example shows how to assign a client add timeout to a workgroup bridge:

wgb(config-if)# workgroup-bridge timeouts client-add 800

ms Enter a number from 800 to 5000.

Release Modification

12.4(25d)JA This command was introduced.