Specifications

2-284

Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges

0L-24115-01

Chapter 2 Cisco IOS Commands for Access Points and Bridges

workgroup-bridge timeouts assoc-response

Use the workgroup-bridge timeouts assoc-response global configuration command to fine tune the

association response timeout for WGB. This CLI command is applicable to an AP working in WGB

mode.

workgroup-bridge timeouts assoc-response ms

Note This command is supported only on APs that support a station role of “WGB.”

Syntax Description

Defaults The default association response timeout is 5000 ms.

Command Modes Global configuration

Command History

Examples This example shows how to assign an authentication response timeout for a workgroup bridge:

wgb(config-if)# workgroup-bridge timeouts assoc-response 800

ms Enter a number from 800 to 5000.

Release Modification

12.4(25d)JA This command was introduced.