Specifications

2-283

Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges

0L-24115-01

Chapter 2 Cisco IOS Commands for Access Points and Bridges

workgroup-bridge client-vlan

Use the workgroup-bridge client-vlan global configuration command to assign a VLAN to the devices

attached to a workgroup bridge. This command enables VLAN trunking on the workgroup bridge’s radio

and Ethernet interfaces.

workgroup-bridge client-vlan vlan-id

Note This command is supported only on 1100 and 1200 series access points and 1300 series access

points/bridges.

Syntax Description This command has no arguments or keywords.

Defaults This command has no defaults.

Command Modes Global configuration

Command History

Examples This example shows how to assign a VLAN to the devices attached to a workgroup bridge:

wgb(config-if)# workgroup-bridge client-vlan 17

Related Commands

Release Modification

12.2(15)JA This command was introduced.

12.3(2)JA This command was modified to support 1100 series access points.

Command Description

show running-config Displays the current operating configuration