Specifications

2-282
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
wlccp wnm ip address
Examples This example shows how to configure the priority for an access point as a candidate to provide WDS:
AP(config)# wlccp wds priority 200 interface bvi 1
Related Commands
wlccp wnm ip address
Use the wlccp wnm ip address global configuration command to configure the IP address of the wireless
network manager (WNM) that performs network management for the wireless LAN to which the access
point belongs.
wlccp wnm ip address
Note This command is not supported on bridges.
Syntax Description This command has no arguments or keywords.
Defaults This command has no defaults.
Command Modes Global configuration
Command History
Examples This example shows how to configure the IP address of the wireless network manager:
AP(config)# wlccp wnm ip address 10.10.0.101
Related Commands
Command Description
wlccp ap username Configures an access point to participate in CCKM
wlccp authentication-server Specifies server lists for 802.1x authentication for client and
infrastructure devices participating in CCKM
Release Modification
12.2(13)JA This command was introduced.
Command Description
wlccp ap username Configures an access point to participate in CCKM
wlccp authentication-server Specifies server lists for 802.1x authentication for client and
infrastructure devices participating in CCKM