Specifications

2-281
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
wlccp wds priority
Related Commands
wlccp wds priority
Use the wlccp wds priority global configuration command to configure an access point to provide
Wireless Domain Services (WDS). When configuring Cisco Centralized Key Management (CCKM), you
configure one or more access points or switches as candidates to provide WDS. The device with the
highest priority provides WDS.
wlccp wds
priority priority
interface interface
Note This command is not supported on bridges and 350 series access points.
Syntax Description
Defaults This command has no defaults.
Command Modes Global configuration
Command History
Command Description
show wlccp Display information on devices participating in Cisco Centralized Key
Management (CCKM) and WDS, including addresses in the MAC
authentication cache.
priority priority Specifies the priority of the access point among devices configured to
provide WDS. Enter a priority number from 1 to 255.
interface interface Specifies the interface on which the access point sends out WDS
advertisements. For this release, you must use bvi 1 as the interface for
WDS advertisements.
Release Modification
12.2(11)JA This command was introduced.