Specifications

2-17
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
authentication client
Related Commands
authentication client
Use the authentication client configuration interface command to configure a LEAP username and
password that the access point uses when authenticating to the network as a repeater.
authentication client username username password password
Syntax Description
Defaults This command has no defaults.
Command Modes SSID configuration interface
Command History
Examples This example shows how to configure the LEAP username and password that the repeater uses to
authenticate to the network:
AP(config-if-ssid)# authentication client username ap-north password buckeye
Related Commands
Command Description
group (local server configuration
mode)
Creates a user group on the local authenticator and enters user
group configuration mode
nas (local server configuration
mode)
Adds an access point to the list of NAS access points on the
local authenticator
radius-server local Enables the access point as a local authenticator and enters
local server configuration mode
show running-config Displays the current access point operating configuration
username Specifies the repeater’s LEAP username
password Specifies the repeater’s LEAP password
Release Modification
12.2(4)JA This command was introduced.
Command Description
ssid Specifies the SSID and enters the SSID configuration mode
show running-config Displays the current access point operating configuration