Specifications

2-277
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
wlccp ap username
wlccp ap username
Use the wlccp ap username global configuration command to configure an access point to authenticate
through the device configured for wireless domain services (WDS) and participate in Cisco Centralized
Key Management (CCKM). Use the no form of the command to disable the username.
wlccp ap username username password password
no wlccp ap username username
Note This command is not supported on bridges.
Syntax Description
Defaults This command has no defaults.
Command Modes Global configuration
Command History
Examples This example shows how to configure the username and password for an access point that will participate
in CCKM:
AP(config)# wlccp ap username birdman password 8675309
Related Commands
username username Specifies the username that the access point uses when it authenticates
through the device configured for WDS
password password Specifies the password that the access point uses when it authenticates
through the device configured for WDS
Release Modification
12.3(8)JA This command was introduced.
Command Description
wlccp authentication-server Specifies server lists for 802.1x authentication for client and
infrastructure devices participating in CCKM