Specifications

2-276
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
wlccp ap eap profile
Related Commands
wlccp ap eap profile
Use the wlccp ap eap profile global configuration command to enable an EAP profile for WLSM. Use
the no form of this command to disable the EAP profile.
wlccp ap eap profile profile name
no wlccp ap eap profile
Syntax Description
Defaults This command has no default setting.
Command Modes Configuration interface
Command History
Usage Guidelines Use the wlccp ap eap profile command to enable an eap profile for WLSM.
This example shows how to create an EAP profile:
AP(config)# wlccp ap eap profile test
This example shows how to disable the EAP profile:
AP(config)# no wlccp ap eap profile
Related Commands
Command Description
ssid Specifies the SSID and enters the SSID configuration mode
profile name Specifies the EAP profile name.
Release Modification
12.3(8)JA This command was introduced.
Command Description
eap profile Configures an EAP profile on the access point.
method
(eap profile configuration mode)
Configures EAP types for the EAP profile.
show eap registrations Displays EAP registrations for the access point.
show eap sessions Displays EAP statistics for the access point.
dot1x eap profile Configures a dot1x EAP profile for an interface.