Specifications

2-275
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
vlan (SSID configuration mode)
This example shows how to add a user to the list of clients allowed to authenticate using MAC-based
authentication on the local authenticator:
AP(config-radsrv)# user 00074218d01b password 00074218d01b group cashiers
Related Commands
vlan (SSID configuration mode)
Use the vlan SSID configuration mode command to configure the radio interface (for the specified
SSID) to support a specific Ethernet virtual LAN (VLAN). Use the no form of the command to reset the
parameter to the default value.
[no] vlan vlan-id
Syntax Description
Defaults This command has no defaults.
Command Modes SSID configuration interface
Command History
Examples This example shows how to configure the VLAN that uses the radio SSID (wireless LAN):
AP(config-if-ssid)# vlan 2
This example shows how to reset the VLAN parameter to default values:
AP(config-if-ssid)# no vlan
Command Description
group (local server configuration
mode)
Creates a user group on the local authenticator and enters user
group configuration mode
nas (local server configuration
mode)
Adds an access point to the list of NAS access points on the
local authenticator
radius-server local Enables the access point as a local authenticator and enters
local server configuration mode
show running-config Displays the current access point operating configuration
vlan-id Specifies the virtual Ethernet LAN identification number for the SSID
Release Modification
12.2(4)JA This command was introduced.