Specifications

2-268
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
transmit-op (QOS Class interface configuration mode)
transmit-op (QOS Class interface configuration mode)
Use the transmit-op QOS Class interface configuration mode command to configure the CAC transmit
opportunity time for a radio interface. Use the no form of the command to remove the setting.
transmit-op 0-65535
no transmit-op
Note This command is not supported when operating in repeater mode.
Syntax Description
Defaults When QoS is enabled, the default transmit-op settings for access points match the values in Table 2-15,
and the default transmit-op settings for bridges match the values in Table 2-16.
Command Modes QOS Class interface configuration mode
Command History
0-65535 Specifies the transmit opportunity time (0 to 65535 usec).
Ta b l e 2-15 Default transmit op Definitions for Access Points
Class of Service Transmit Opportunity
Background 0
Best Effort 0
Video <100ms Latency 3008
1
1. 6016—On access points with IEEE 802.11b radios
Voice <100ms Latency 1504
2
2. 3264—On access points with IEEE 802.11b radios
Ta b l e 2-16 Default transmit op Definitions for Bridges
Class of Service Transmit Opportunity
Background 0
Best Effort 0
Video <100ms Latency 3008
Voice <100ms Latency 1504
Release Modification
12.3(8)JA This command was introduced.