Specifications

2-253
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
snmp-server user
Defaults Table 2-14 describes default values for the encrypted option, passwords and access lists:
Ta b l e 2-14 Default Values for snmp-server user Options
Command Modes Global configuration
Command History
Usage Guidelines To configure a remote user, specify the IP address or port number for the remote SNMP agent of the
device where the user resides. Also, before you configure remote users for a particular agent, configure
the SNMP engine ID, using the command snmp-server engineID with the remote option. The remote
agent’s SNMP engine ID is needed when computing the authentication/privacy digests from the
password. If the remote engine ID is not configured first, the configuration command will fail.
SNMP passwords are localized using the SNMP engine ID of the authoritative SNMP engine. For
informs, the authoritative SNMP agent is the remote agent. You need to configure the remote agent’s
SNMP engine ID in the SNMP database before you can send proxy requests or informs to it.
Related Commands
Setting Description
encrypted Not present by default. Specifies that the auth and priv passwords are MD5 digests
and not text passwords.
passwords Assumed to be text strings.
access lists Access from all IP access lists is permitted by default.
remote users All users are assumed to be local to this SNMP engine unless you use the remote
option to specify that they are remote.
Release Modification
12.3(4)JA This command was introduced.
Command Description
snmp-server group Configures a new SNMP group
snmp-server view Creates or updates an SNMP view entry