Specifications

2-251
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
snmp-server location
If you have the localized MD5 or SHA digest, you can specify that string instead of the plain-text
password. The digest should be formatted as aa:bb:cc:dd where aa, bb, and cc are hex values. Also, the
digest should be exactly 16 octets long.
The following example shows how to specify the command with a digest name of
00:11:22:33:44:55:66:77:88:99:AA:BB:CC:DD:EE:FF:
snmp-server user John Johngroup v3 encrypted auth md5
00:11:22:33:44:55:66:77:88:99:AA:BB:CC:DD:EE:FF
Related Commands
snmp-server location
Use the snmp-server location global configuration command to specify the SNMP system location and
the location-name attribute recommended by the Wi-Fi Alliance’s guidelines for Wireless Internet
Service Provider roaming (WISPr).
snmp-server location location
Syntax Description
Defaults This command has no defaults.
Command Modes Global configuration
Command History
Examples The WISPr Best Current Practices for Wireless Internet Service Provider (WISP) Roaming document
recommends that you enter the location name in this format:
hotspot_operator_name,location
This example shows how to configure the SNMP system location and the WISPr location-name attribute:
ap# snmp-server location ACMEWISP,Gate_14_Terminal_C_of_Newark_Airport
Command Description
snmp-server user Configures a new user for an SNMP group
snmp-server view Creates or modifies an SNMP view entry
location Specifies the SNMP system location and the WISPr location-name
attribute
Release Modification
12.2(13)JA This command was introduced.