Specifications

2-248
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
snmp-server enable traps envmon temperature
snmp-server enable traps envmon temperature
Use the snmp-server enable traps envmon temperature global configuration command to enable an
SNMP trap for monitoring bridge radio temperature. This trap is sent out when the bridge radio
temperature approaches the limits of its operating range (55° C to –33° C; 131° F to –27.4° F).
snmp-server enable traps envmon temperature
Note This command is supported only on bridges.
Syntax Description This command has no arguments or keywords.
Defaults This command has no defaults.
Command Modes Global configuration
Command History
Examples This example shows how to enable the envmon temperature trap:
bridge# snmp-server enable traps envmon temperature
Related Commands
Release Modification
12.2(11)JA This command was introduced.
Command Description
show environment Displays current temperature of the bridge radio