Specifications

2-247
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
snmp-server enable traps
Usage Guidelines For additional notification types, see the Related Commands table for this command.
SNMP notifications can be sent as traps or inform requests. This command enables both traps and inform
requests for the specified notification types. To specify whether the notifications should be sent as traps
or informs, use the snmp-server host [traps | informs] command.
If you do not enter an snmp-server enable traps command, no notifications controlled by this command
are sent. In order to configure the router to send these SNMP notifications, you must enter at least one
snmp-server enable traps command. If you enter the command with no keywords, all notification types
are enabled. If you enter the command with a keyword, only the notification type related to that keyword
is enabled. In order to enable multiple types of notifications, you must issue a separate snmp-server
enable traps command for each notification type and notification option.
The snmp-server enable traps command is used in conjunction with the snmp-server host command.
Use the snmp-server host command to specify which host or hosts receive SNMP notifications. In
order to send notifications, you must configure at least one snmp-server host command
Related Commands Command Description
show environment Displays current temperature of the the radio in a wireless bridge