Specifications

2-245
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
show wlccp ap rm enhanced-neighbor-list
show wlccp ap rm enhanced-neighbor-list
Use the show wlccp ap enhanced-neighbor-list privileged EXEC command to display the enhanced
neighbor list. The enhanced neighbor list feature is enabled on specific access points from the Cisco
WLSE.
show wlccp ap rm enhanced-neighbor list
Note This command is not supported on bridges.
Syntax Description This command has no arguments or keywords.
Defaults This command has no defaults.
Command Modes Privileged EXEC
Command History
Examples This example shows the command you enter on the access point providing WDS to display information
on the mobile nodes:
AP# show wlccp ap enhanced-neighbor-list
Ehnanced Neighbor List: Enabled
Neighbor APs List
--------------------]
Related Commands5
Release Modification
12.3(8)JA This command was introduced.
AP BSSID Channel Band Phy-Type Tx-power Min-rssi Hysteresis Scan-threshold Trans-time
1 0000.0123.0801 6 1 1 5 50 5 65 60
2 0000.0123.0802 11 2 2 10 50 5 65 60
3 0000.0123.0803 56 3 1 20 50 5 65 60
4 0000.0123.0804 100 4 1 30 50 5 65 60
5 0000.0123.0805 48 5 1 50 50 5 65 60
Command Description
debug wlccp ap rm
enhanced-neighbor-list
Displays internal debugging and error messages of the Enhanced
Neighbor List feature.
show debugging Displays all debug settings and the debug packet headers
show wlccp Displays WLCCP information