Specifications

2-241
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
show wlccp
show wlccp
Use the show wlccp privileged EXEC command to display information on devices participating in Cisco
Centralized Key Management (CCKM).
Use the show wlccp privileged EXEC command to display information on devices participating in Cisco
Centralized Key Management (CCKM).
show wlccp
ap [rm [context | accumulation]] |
wnm status |
wds [ap [detail | mac-address mac-address [mn-list]]] |
[mn [detail | mac-address mac-address]] | [statistics] | [nm] |
[aaa authentication mac-authen filter-cache]
Note This command is not supported on bridges.
Syntax Description ap [rm [context |
accumulation ]]
(Optional) When you enter this option on an access point participating
in CCKM, this option displays the MAC address and IP address of the
access point providing wireless domain services (WDS), the access
point’s state (authenticating, authenticated, or registered), the IP
address of the infrastructure authenticator, and the IP address of the
client device (MN) authenticator.
• rm—Use this option to display information on radio measurement
contexts or the radio measurement accumulation state.