Specifications

2-239
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
show running-config ssid
• Invalid PAC received—the number of PACs received that were expired, that the authenticator could
not decrypt, or that were assigned to a client username not in the authenticator’s database
The third section lists stats for individual users. If a user is blocked and the lockout time is set to infinite,
blocked appears at the end of the stat line for that user. If the lockout time is not infinite, Unblocked in
x seconds appears at the end of the stat line for that user.
Use this privileged exec mode command to reset local authenticator statistics to zero:
AP# clear radius local-server statistics
Related Commands
show running-config ssid
Use the show running-config ssid privileged EXEC command to view configuration details for SSIDs
that are configured globally.
show running-config ssid ssid
Syntax Description
Defaults This command has no defaults.
Command Modes Privileged EXEC
Command History
Related Commands
Command Description
radius-server local Configures the access point as a local or backup authenticator
ssid Displays configuration details for a specific SSID.
Release Modification
12.3(2)JA This command was introduced.
Command Description
dot11 ssid Creates an SSID in global configuration mode
ssid Creates an SSID for a specific radio interface or assigns a
globally configured SSID to a specific interface