Specifications

2-13

Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges

0L-24115-01

Chapter 2 Cisco IOS Commands for Access Points and Bridges

anonymous-id (dot1x credentials configuration mode)

Use the anonymous-id dot1x credentials configuration mode command to configure an anonymous

username for the dot1x credentials. Use the no form of the command to disable anonymous-id.

[no] anonymous-id name

Syntax Description

Defaults This command has no defaults.

Command Modes SSID configuration interface

Command History

Examples This example shows how to configure a dot1x certificate anonymous username:

AP(config-dot1x-creden)# anonymous-id user1

This example shows how to disable the anonymous username:

AP(config-dot1x-creden)# no anonymous-id

Related Commands

traffic-stream Configures CAC traffic data rates and priorities for a radio

interface on the access point.

debug cac Provides CAC admission control debugging information for on

the access point.

Command Description

name Specifies the anonymous username for the dot1x credentials.

Release Modification

12.3(8)JA This command was introduced.

Command Description

dot1x credentials Configures the dot1x credentials on the access point.

show dot1x credentials Displays the configured dot1x credentials on the access point.