Specifications

2-234
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
show ip igmp snooping groups
show ip igmp snooping groups
Use the show ip igmp snooping groups privileged EXEC command to display IGMP snooping status
information.
show ip igmp snooping groups
[count] [network-id network id]
[vlan vlan id [group address] [count] ]
Syntax Description
Defaults This command has no defaults.
Command Modes Privileged EXEC
Command History
Examples This example shows how to display the numbrer of IGMP snooping groups configured on the access
point:
AP# show ip igmp snooping groups count
Total number of groups: 0
This example shows how to display IGMP snooping group information by vlan:
AP# show ip igmp snooping groups vlan 1
This example shows how to display the number of IGMP snooping group in a vlan:
AP# show ip igmp snooping groups vlan 1 count
Related Commands
count Displays group count information.
network-id network-id Displays group information by wireless Network ID.
vlan vlan id Displays group information by VLAN.
group address Displays group information for the specified VLAN.
count Displays the nunber of groups in the VLAN.
Release Modification
12.3(8)JA This command was introduced.
Command Description
show ip igmp snooping
groups
Displays IGMP snooping group information.
ip igmp snooping vlan Enables IGMP snooping for a Catalyst VLAN.