Specifications

2-229
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
show iapp standby-parms
Examples This example shows how to display the list of IAPP rogue access points:
AP# show iapp rogue-ap-list
Related Commands
show iapp standby-parms
Use the show iapp standby-parms privileged EXEC command to display IAPP standby parameters
when a standby MAC address is configured. The information displayed includes the standby MAC
address, the time-out value, and the poll-frequency value.
show iapp standby-parms
Note This command is not supported on bridges.
Syntax Description This command has no arguments or keywords.
Defaults This command has no defaults.
Command Modes Privileged EXEC
Command History
Examples This example shows how to display the IAPP standby parameters:
AP# show iapp standby-parms
Related Commands
Command Description
clear iapp rogue-ap-list Clears the rogue access point list
Release Modification
12.2(4)JA This command was introduced.
Command Description
logging buffered Configures an access point with a specified MAC address as the
standby
iapp standby poll-frequency Configures the standby access point polling interval
iapp standby timeout Configures the standby access point polling time-out value