Specifications

2-227
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
show environment
show environment
Use the show environment EXEC command to display information about the internal temperature of
the bridge radio.
show environment
Note This command is supported only on bridges. It measures and displays the internal temperature of the unit
and should not be confused with the external temperature limits for the device.
Syntax Description This command has no arguments or keywords.
Defaults This command has no defaults.
Command Modes EXEC
Command History
Examples This example shows how to display temperature information for the bridge radio:
bridge# show environment
Environmental Statistics
Environmental status as of 00:10:45 UTC Thu Mar 27 2003
Data is 3 second(s) old, refresh in 57 second(s)
Dot11Radio0 temperature measured at 37(C)
Related Commands
Release Modification
12.2(11)JA This command was introduced.
Command Description
snmp-server enable traps
envmon temperature
Enable an SNMP trap to announce near-out-of-range bridge radio
temperature.