Specifications

2-225
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
show eap registrations
Command Modes Privileged EXEC
Command History
Examples This example displays typical EAP registrations on an access point:
AP# show eap registrations
Registered EAP Methods:
Method Type Name
4 Peer MD5
6 Peer GTC
13 Peer TLS
17 Peer LEAP
26 Peer MSCHAPV2
43 Peer FAST
Registered EAP Lower Layers:
Handle Type Name
3 Peer Dot1x-Supplicant
2 Peer AP-WDS Auth Layer
1 Peer EAP-FAST
This example displays typical EAP transport registrations on an access point:
AP# show eap registrations transport
Registered EAP Lower Layers:
Handle Type Name
3 Peer Dot1x-Supplicant
2 Peer AP-WDS Auth Layer
1 Peer EAP-FAST
This example displays typical EAP-FAST transport details on an access point:
AP#show eap registrations transport EAP-FAST
Configuration details for lower layer: 'EAP-FAST'
Peer Config:
Credentials profile: None
EAP profile name: None
Idle timer: 60s
Retransmit timer: 30s
Maximum retrans: 2
Auth Config: None
Encap bytes: 0
Related Commands
Release Modification
12.3(8)JA This command was introduced.
Command Description
eap profile Configures an EAP profile.
dot1x eap profile Configures an EAP profile for an interface.
show eap sessions Displays EAP session information on the access point.