Specifications

2-221
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
show dot11 vlan-name
show dot11 vlan-name
Use the show dot11 vlan-name privileged EXEC command to display VLAN name and ID pairs
configured on the access point. If your access point is not configured with VLAN names or is configured
only with VLAN IDs, there is no output for this command.
show dot11 vlan-name [vlan-name]
Syntax Description
Defaults When you do not specify a VLAN name, this command displays all VLAN name and ID pairs configured
on the access point.
Command Modes Privileged EXEC
Command History
Examples This example shows how to display all VLAN name and ID pairs on an access point:
AP# show dot11 vlan-name
This example shows how to display the VLAN name and ID for a specific VLAN name:
AP# show dot11 vlan-name chicago
Related Commands
vlan-name (Optional) Displays the VLAN name and VLAN ID for a specific VLAN
name
Release Modification
12.3(2)JA This command was introduced.
Command Description
dot11 vlan-name Assigns a VLAN name to a VLAN.