Specifications

2-217
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
show dot11 ids mfp
show dot11 ids mfp
Use the show dot11 ids mfp privileged EXEC command to display to Management Frame Protection
(MFP) parameters on the access point.
show dot11 ids mfp
detector [statistics]
distributor {detectors |generators | statistics}
generator
client statistics
show dot11 ids mfp io
Defaults There are no defaults for this command.
Command Modes Privileged EXEC
Command History
Examples This example shows how to display the MFP detectors configured on the access point:
ap(config)# show dot11 lds mfp detector
Related Commands
detector Indicates if the MFP detector is configured on the access point.
detector statistics Displays the MFP statistics for the access point.
distributor detectors Displays the MFP distributed detectors.
distributor generators Displays the MFP distributed generators.
distributor statistics Displays the MFP receive statistics on the access point.
generator Displays the MFP generator.
io Displays the MFP IO statistics.
client statistics Displays the MFP-2 statistics on the access point.
Release Modification
12.3(8)JA This command was introduced.
Command Description
dot11 ids mfp Configures the MFP parameters on the access point.
debug dot11 ids mfp Debugs MFP operations on the access point.