Specifications

2-214
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
show dot11 carrier busy
show dot11 carrier busy
Use the show dot11 carrier busy privileged EXEC command to display recent carrier busy test results.
You can display test results once using this command. After the display, you must use the dot11 carrier
busy command to run the carrier busy test again.
show dot11 carrier busy
Syntax Description This command has no arguments or keywords.
DefaultsDefaults This command has no defaults.
Command Modes Privileged EXEC
Command History
Examples This example shows how to display the carrier busy test results:
AP# show dot11 carrier busy
This example shows the carrier busy test results:
Frequency Carrier Busy %
--------- --------------
5180 0
5200 2
5220 27
5240 5
5260 1
5280 0
5300 3
5320 2
Related Commands
Release Modification
12.2(11)JA This command was introduced.
Command Description
dot11 carrier busy Runs the carrier busy test