Specifications

2-211
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
show dot11 bssid
show dot11 bssid
Use the show dot11 bssid privileged EXEC command to display the relationship between SSIDs and
BSSIDs or MAC addresses.
show dot11 bssid
Syntax Description This command has no arguments or keywords.
DefaultsDefaults This command has no defaults.
Command Modes Privileged EXEC
Command History
Examples This example shows how to display a list of BSSIDs and SSIDs:
AP# show dot11 bssid
This example shows the command output:
AP1230#show dot11 bssid
Interface BSSID Guest SSID
Dot11Radio1 0011.2161.b7c0 Yes tsunami
Dot11Radio0 0005.9a3e.7c0f Yes WPA2-TLS-g
Related Commands
show dot11 cac
Use the show dot11 cac command to display CAC information for a radio interface.
show dot11 cac [dot11radio number]
Note This command is not supported on repeaters.
Release Modification
12.3(4)JA This command was introduced.
Command Description
dot11 mbssid Enables BSSIDs on all radio interfaces that support multiple BSSIDs
mbssid Enables BSSIDs on a radio interface
mbssid (SSID
configuration mode)
Specifies that a BSSID is included in beacons and specifies a DTIM
period for the BSSID